Mammut Adhesive - High Tack Adhesive for 3D Wall Panels
Mammut adhesive is a professional wall panel adhesive with extremely high initial tack.
Mamut High Tack by Den Braven is a high-quality professional adhesive based on hybrid technology. It cures under the influence of humidity to form a durable, elastic rubber.
Key Features
- Combines with the "mammoth force" ā up to 22 kg/cmĀ² maximum breaking strength without support.
- Replaces screws, dowels and nails for highly versatile installation.
- Very short drying time with no water or solvents.
- After hardening, permanently flexible and resistant to weather conditions, including temperatures from -40Ā°C to +90Ā°C and water.
- Suitable for smooth and porous substrates, indoors and outdoors.
- Very good adhesion to most construction substrates, including wet surfaces, concrete, plaster, stone, construction ceramics, glass, steel, metals, varnished wood, PVC, polyester and similar plastics.
- Resistant to flowing for horizontal and vertical applications, blistering, shrinkage scratches and cracks.
- High physical and mechanical resistance and good tolerance to vibrations.
- Does not contain isocyanates, silicone, solvents, polyvinyl chloride or plasticizers.
- Almost odourless and chemically neutral. Suitable for mirrors without damaging the silver layer.
Mammut adhesive is suitable and recommended for use with most of our wall panels. We only accept product warranties for products installed using the recommended type of adhesive.
Storage
Store between +5Ā°C and +25Ā°C in shaded conditions. When stored as recommended in the original unopened packaging, the shelf life is 18 months.
Suitable For
- Felt panels
- Upholstered wall panels
- Concrete panels
- Concrete 3D panels
- Concrete 3D tiles
- Acoustic slat wall panels
- Cork wall panels
Directions for Use
Apply adhesive with the provided V-nozzle in a "ventilating way" in vertical stripes with a 10ā20 cm distance between stripes.
Bring the materials into position and press firmly so that the adhesive is a minimum of 2ā3 mm thick between the material and the surface. Do not apply the adhesive in dots.
Because of the high initial strength, support during curing is usually unnecessary. For further questions, please contact our technical department.
